What are the safety standards requirements for fuses.where is the battery fuse located_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

24 2023-08

Share:

　　 2f652d92c9c961b

　　Fuses, commonly used in electronic products, mainly play a protective role. And fuses have different safety standards, and the certification of fuses varies from country to country. Let's learn about the safety standards of fuses together.

　　Fuse safety standard 1: UL and CSA standards

　　Safety standards for North American regions such as the United States and Canada; The standards for small current fuse tubes are UL248-1/14 and CSA248-1/14.

　　Fuse Safety Standard II: IEC Standard

　　International Electrotechnical Commission standards, safety standards used in Europe and China. The standard for small current fuse tubes is IEC60 127 and GB 9364 (China).

　　Fuse Safety Standard III: KTL Standard

　　Korean Electrical Safety Standards.

　　Fuse Safety Standard 4: JIS Standard

　　Japanese Electrical Safety Standards. The standard for small current fuse tubes is JIS C6575.

Read recommendations:

power fuse wire

moulded plug fuse cover

Application of Three Terminal Fuses in Energy Storage

air conditioner fuse block pull-out replacement

PREVIOUS:Recoverable fuse low resistance 0603 series parameters and application.supercheap auto blade fuse holder

Return

Next：Self recovery fuse for overcurrent protection on industrial control motherboard.air conditioner fuses near me

Related News

October 07,2023

What are the drawbacks of LED Fuses driver power supply.microwave high voltage fuse blown

　　　　What are the drawbacks of LED driver power? With the development of LED applications, LED driver power has also been widely used. Last week, we talked about the development trend of LED driver power. Today, the editor will briefly explain the shortcomings of LED driver power.　　Firstly, the technical personnel of companies that produce LED lighting and related products do not have sufficient understanding of switching power supplies. The power supplies produced can work normally, but some critical evaluations and electromagnetic compatibility considerations are not sufficient, and there are still certain hidden dangers; (Related knowledge: The development trend of LED power drive)　　Secondly, most LED power supply manufacturers have transitioned from ordinary switching power supplies to LED power supplies, and their understanding of the characteristics and use of LEDs is not yet sufficient;　　However, currently there are almost no standards for LEDs, most of which refer to the standar

November 01,2023

Chip fuse specifications | price

　　　　SMD fuse specifications | price - SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.　　The price of SMD fuses varies depending on the type. The latest quotation for SMD fuses in the market is around a few cents, with wholesale prices. Good quality products can be sold for around one yuan. There are differences in prices between suppliers and traders, so when searching for products in bulk, it is more advantageous to find manufacturers and suppliers.　　Chip fuse specification | price - The fuse must be a fusible metal wire in order to fuse in a timely manner and provide protection when the current is high. The fuse material is mainly made of low melting point alloys such as aluminum antimony alloy.　　There are four basic forms of patch fuses: slo

October 20,2023

battery distribution fuse block.Usage and precautions for self restoring fuses

　　　　With the widespread application of self restoring fuses in the electronics industry in Shenzhen, we are paying more and more attention to the safety of electronic products. We need to know the performance of the products used　　Among the technical indicators of PPTC, one is Vmaxi, which represents the maximum voltage that the self recovery fuse protector can withstand in a blocked state. That is to say, in a circuit where the self recovery fuse is connected in series, when the current of the circuit is abnormal, the self recovery fuse will jump from low resistance to high resistance within a certain time range, thereby preventing the flow of abnormal large current and protecting the subsequent circuit from being damaged by large current. At this time, almost all of the voltage of the circuit is added to the self recovery fuse.　　If the voltage applied to the self recovery fuse exceeds Vmaxi at this time, it is easy to cause damage to the self recovery fuse, causing permanent damage a

August 18,2023

The Development History and Trends of Fuses.resettable smd fuse

　　　　1、 Development History of Fuses　　In the 1880s, since Edison invented the light bulb and failed countless experiments on tungsten wire, it also opened up the development history of fuses. The success of light bulbs has also driven the development of fuses. With the development of society and the increasing strength of electrical appliances, the fuse industry has also experienced rapid development.　　The fuse industry in China started relatively late, but has developed rapidly. In 1950, China began to imitate the production methods of the Soviet Union to produce fuses, so the variety of fuses was relatively few, the structure was relatively simple, and the experimental methods were relatively backward. In the early days, the quality of fuses in China was not very good. Until the late 1970s, the emergence of color televisions promoted the development of the fuse industry, and the delay fuses used in color televisions began to move towards international standards. At this time, the fuse

July 14,2023

Precautions for installation of Thermal cutoff.alienware thermal controller error

　　　　Precautions for installation of Thermal cutoff: 1. When the lead wire is bent for use, it should be bent from the part more than 6mm away from the root; When bending, it is not allowed to damage the roots and leads, and it is not allowed to forcefully pull, press, or twist the leads. 2. When the thermal fuse is fixed by screws, riveting, or wiring terminals, it should be able to prevent mechanical creep and the occurrence of poor contact. 3. The connecting components should be able to work reliably within the working range of the electrical product, without displacement due to vibration and impact. When conducting wire welding operations, the heating humidity should be limited to the minimum, and attention should be paid not to apply high temperatures to the thermal fuse; Do not forcefully pull, press, or twist the thermal fuse and leads; After welding, it should be immediately cooled for more than 30 seconds. 5. The thermal fuse can only be used under the specified rated voltage,