power fuse supply
中文
Online Message
Online Message
News & Events News & Events

News & Events

Keep abreast of company dynamics

High voltage fuse.battery charger fuse

21

2023-07

Share:

　　

　　1. British standard fuse

　　British fuses are mainly used for equipment produced in Commonwealth countries. The British standard fuse case is made of ceramic material, and the product has the characteristics of small size and high cost-effectiveness, which is particularly favored by UPS manufacturers below 240V.

　　2. American standard fuse

　　American style fuses are the most widely used, covering most power electronic product applications. The American standard fuse case is made of melamine mesh cloth and ceramic lamination process, which has strong impact resistance, small Joule integral value, low power loss, superior DC performance and other characteristics, and is widely used in substations, Electric locomotive and other occasions.

　　3. European standard fuse

　　The shell of the European standard square fuse is made of ceramic material. This product has the characteristics of low operating temperature, low power loss, and small Joule integral value, and is suitable for applications that require compact structure, superior performance, and high power, especially in manual maintenance switches (MSDs) that are widely used.

　　4. Standard fuse

　　The French standard fuse has the characteristics of strong cycling performance, small size, and unique construction, which is suitable for small UPS, small AC drives, and other low-power applications with small space occupation

Read recommendations:

5C

bimetal thermostat cost in india

test water heater thermostat

2023.09.19 Customer Annual Factory Audit

Application Fields and Development of Small Fuses.smd resettable fuse

PREVIOUS:Calculation method for high-voltage fuses.tv fuse replacement

Return

Next：Definition of high-voltage fuse.mini cooper fuse box

Related News

September 19,2023

2023.06.27 Attend 2023 Guangzhou International Innovation Exhibition and New Energy Vehicle Innovation Exhibition

　　　　At present, China's automobile industry has entered a stage of high-quality development. Six major automobile industry clusters have been formed domestically, namely in the Yangtze River Delta, the Pearl River Delta, the Beijing-Tianjin-Hebei region, the Central China region, the Chengdu-Chongqing Western region, and the Northeast region. In order to accelerate the integration and innovation of the automotive industry supply chain, and to contribute to the construction of a manufacturing powerhouse, under the active promotion of the Guangdong Provincial Department of Industry and Information Technology, the "2023 Guangzhou International Integration and Innovation Exhibition for the New Energy Automobile Industry" with the theme of "crossing boundaries, deep integration, and reshaping the automotive industry chain" has emerged." XC Electronics(Shenzhen)Corp.,LTD participated in this exhibition as an outstanding supplier of fuses in the new energy industry.

September 04,2023

The Application of Self Recovery Fuses in Door Locks.high voltage fuse diagram

　　　　Fingerprint door lock is a widely used door lock product in modern homes, factories, and enterprises. Its main functions include fingerprint recognition, storage, and opening and closing door locks. It is composed of fingerprint recognition and storage circuits, DSP data processing circuits, door opening and closing actuators, power circuits, and other components. Some door locks also require output signals to control the camera, open voice communication connections, and complete remote control functions. In this system, the power circuit, data transmission port circuit, and electromagnetic actuator of the control lock are prone to burning out the power circuit and DSP control system circuit due to unstable power supply voltage, lightning discharge, short circuit of installation wiring, etc. In severe cases, safety hazards such as burning out wires and causing wires to catch fire may occur. These interface points all require the design of ESD, overvoltage, overcurrent, and reverse

August 18,2023

The Development History and Trends of Fuses.resettable smd fuse

　　　　1、 Development History of Fuses　　In the 1880s, since Edison invented the light bulb and failed countless experiments on tungsten wire, it also opened up the development history of fuses. The success of light bulbs has also driven the development of fuses. With the development of society and the increasing strength of electrical appliances, the fuse industry has also experienced rapid development.　　The fuse industry in China started relatively late, but has developed rapidly. In 1950, China began to imitate the production methods of the Soviet Union to produce fuses, so the variety of fuses was relatively few, the structure was relatively simple, and the experimental methods were relatively backward. In the early days, the quality of fuses in China was not very good. Until the late 1970s, the emergence of color televisions promoted the development of the fuse industry, and the delay fuses used in color televisions began to move towards international standards. At this time, the fuse

July 13,2023

Action of fuse and fuse.motor fuse size calculator

　　　　The action of a fuse is achieved by the melting of the melt, and when the current is high, the time required for the melt to fuse is shorter. When the current is low, the melting time required for the melt to melt is longer, and it may not even melt. Therefore, for the melt, its operating current and operating time characteristics, namely the ampere second characteristics of the fuse, are inverse time characteristics.　　Each melt has a minimum melting current. Corresponding to different temperatures, the minimum melting current also varies. Although this current is affected by the external environment, it can be disregarded in practical applications. The ratio of the minimum melting current of the melt to the rated current of the melt is generally defined as the minimum melting coefficient. Commonly used melts have a melting coefficient greater than 1.25, which means that a melt with a rated current of 10A will not fuse when the current is below 12.5A. The relationship between fuse

October 24,2023

plastic fuse board under stairs.Why does the resistance of patch fuses become large and constant?

　　　　The operating principle of a fuse is that an overcurrent causes the thermal balance on the melt to be disrupted. When the temperature of the melt rises to the melting point of the metal material, the middle part of the melt changes from solid to liquid. Due to the surface tension and gravity of the metal material suspended in the tube, the liquid part of the melt pulls away from both ends and sags downwards. The voltage caused arcing causes the melt temperature to continue to rise, further arcing and further distance pulling apart, Until the circuit is completely cut off. For SMD fuses, their operating principle is the same. However, due to different structural states, the surrounding of the metal melt is tightly surrounded by the polymer or ceramic materials of its substrate. Even the melted metal cannot contract towards both ends and can only rely on diffusion, infiltration, or absorption towards the surrounding materials. If the overcurrent disappears during this process (such a

+86 755 89762685

MB:+86 13924633629 Ms.vicky

E-mail: waimao@xcfuse.com


Factory :

XC Electronics(Shenzhen)Corp.,LTD

Add: Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China


Shenzhen branch: Shenzhen Xucheng Electronic Commerce co.Ltd

Add: 8-15 Jinyuan Industrial zone,Heao, Henggang, Shenzhen 518115,China

About Us Products Resource Solutions Certifications News & Events Contact Us

© Copyright. xc 2023. All rights reserved.粤ICP备11049369号