resettable surface mount fuse.The selection of fuses involves the following factors_mini cooper fuse box factory_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

18 2023-11

Share:

　　 d83bbc296c1f220

　　1. Normal operating current.

　　2. The voltage applied to the fuse.

　　3. It is necessary to disconnect the current of the fuse.

　　4. Short and long periods of abnormal current are allowed.

　　5. The ambient temperature of the fuse.

　　6. Pulse, impulse current, surge current, starting current, and circuit transient values.

　　7. Are there any special requirements that exceed the fuse specifications.

　　8. Dimensional limitations for installation structures.

　　9. Required certification body.

　　10. Fuse holder components: fuse clip, installation box, panel installation, etc.

Read recommendations:

defrost bimetal thermostat

1 amp surface mount fuse

High voltage fuse.battery fuse terminal

What are the safety standards requirements for fuses.where is the battery fuse located

PREVIOUS:automotive blade fuse colours.1206 series patch self recovery insurance

Return

Next：samsung tv ceramic fuse replacement.How to Select Chip Fuses

Related News

January 08,2024

pptc fuse full form.What are the characteristics of direct plug-in fuse thermistors

　　　　A thermistor is a type of thermoelectric resistor, and the principle of thermistors is that temperature causes a change in resistance. However, nowadays thermoelectric resistors are generally industrialized, mainly referring to commonly used thermistors such as PT100 and CU50. The difference between thermistors and thermistors is that generally, thermistors refer to metal thermistors (PT100), while thermistors refer to semiconductor thermistors. Due to the temperature coefficient of semiconductor thermistors being more than 10-100 times larger than that of metals, they can detect temperature changes of 10-6 ℃, and the resistance value can be arbitrarily selected between 0.1 and 100k Ω. So it is called a thermistor. The curve of the resistance value of a thermistor with temperature changes is non-linear, and the linearity of each same model is also different, and the temperature measurement range is relatively small. So in industry, metal thermistors are generally used, which is wha

November 15,2023

heater for garage with thermostat.Characteristics of disposable blown fuses

　　　　The main difference between slow fuse and fast fuse is their ability to withstand instantaneous pulse current, which means that they can withstand the impact of surge current when switching on and off, ensuring the normal operation of the equipment. Therefore, slow fuse is often referred to as surge resistant fuse. From a technical perspective, slow melting fuses have a large melting heat value of I2t, and the energy required for fuse melting is relatively high. Therefore, for fuses with the same rated current, slow melting has a much stronger ability to withstand pulses than fast melting.　　Product features:　　Disposable function: After a circuit fault occurs, the fuse opens, the equipment stops running, and responds quickly to the fault current. It cannot be reused　　Small size: The compact design saves circuit board space.　　Chip packaging: suitable for reflow soldering, easy and fast to use.　　Easy installation: The fuse has no polarity and can be connected in series to the circuit

November 14,2023

microwave high voltage fuse blown.Basic knowledge of fuse wire based fuses

　　　　Basic knowledge and common fuse specifications of fuse wire base fuses　　In many electronic devices, fuses are indispensable. Since Edison invented the　　After the first plug-in fuse with a thin wire enclosed in the lamp holder, there are more and more types of fuses and their applications are becoming more and more widespread. Here are some common knowledge on fuse parameters, selection, and application.　　The rated values and performance indicators of fuses are determined based on laboratory conditions and acceptance specifications. There are multiple authoritative testing and appraisal institutions internationally, such as UL certification from Underwriters Laboratories in the United States, CSA certification from the Canadian Standards Association, MTTI certification from the Japan Department of International Trade and Industry, and ICE certification from the International Electrotechnical Commission. The selection of fuses involves the following factors: 1. Normal operating curre

December 04,2023

pptc resettable fuse price.The application fields of SMD fuses

　　　　1. Product certification. For example, exporting to North America requires UL or CSA certification. At present, products exported to Europe still need to comply with the RoHs directive of the European Union, which is commonly referred to as environmental certification such as SGS.　　2. The normal working current of the circuit. The working current through the fuse should not exceed 75% of the rated current of the fuse.　　3. The applied voltage applied to the fuse. Usually, patch fuses are used in portable devices, and the working voltage of the circuit is generally not high. As long as the rated voltage of the patch fuse is higher than the working voltage of the circuit, it can be used with confidence.　　4. The ambient temperature of the fuse. When applying patch fuses to portable devices, appropriate consideration should be given to the temperature rise of the fuse, that is, the reduction of the rated current of the fuse. The ambient temperature during fuse operation should be within

December 06,2023

littelfuse fast acting fuse.Model and specifications of household fuses

　　　　Fuses are mainly used as basic protective devices for preventing short circuit faults in household appliances. They are generally equipped and selected based on the current of the household appliance. This can be simply calculated by considering current=(power ÷ voltage)&TIMes; 1.5, for example, electrical equipment current=1 kW ÷ 220 V&TImes; 1.5=6.8A, you can choose fuses 6-8A.　　The fusing current of a fuse is usually 1.5-2.0 times the rated current. If the total power of each household appliance exceeds 1100 watts during normal electricity use in a household, choose a 5-ampere fuse and use a No. 20 fuse with a diameter of 0.98 millimeters. When the current exceeds 7.5 amperes to 10 amperes, the fuse will automatically blow to achieve protection.　　SMD fuses are made of lead antimony alloy with high resistivity and low melting point. Its function is to generate more heat when there is too much current in the circuit, causing its temperature to reach the melting point, thereby fusi