slow blow fuse vs fast blow fuse.The difference and function of fuses and relays_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

20 2023-10

Share:

　　 472a5ff3b0d55

　　A relay is actually an "automatic switch" that uses a smaller current to control a larger current. Therefore, it plays a role in automatic regulation, safety protection, and conversion circuits in the circuit.

　　The function of a fuse is to: when a circuit malfunctions or is abnormal, the current continuously increases, and the increased current may damage some important or valuable components in the circuit, or burn the circuit or even cause a fire. If the fuse is correctly installed in the circuit, the fuse will fuse and cut off the current when the current abnormally rises to a certain height and time, thereby protecting the safe operation of the circuit.

　　The relay can be 'off' or 'on' through current control, that is, it can be reconnected after being disconnected, while the Shenzhen fuse needs to be replaced after being disconnected, and programs cannot be used to reconnect it.

Read recommendations:

resettable surface mount fuse

auto reset fuse

power fuse blown

How to choose a fuse.air conditioner fuse keeps tripping

rv air conditioner fuse location.How long does the self restoring fuse operate?

PREVIOUS:rv air conditioner fuse location.How long does the self restoring fuse operate?

Return

Next：30 amp screw in resettable fuse.What are the classifications of fuses and fuses that you know

Related News

October 24,2023

plastic fuse board under stairs.Why does the resistance of patch fuses become large and constant?

　　　　The operating principle of a fuse is that an overcurrent causes the thermal balance on the melt to be disrupted. When the temperature of the melt rises to the melting point of the metal material, the middle part of the melt changes from solid to liquid. Due to the surface tension and gravity of the metal material suspended in the tube, the liquid part of the melt pulls away from both ends and sags downwards. The voltage caused arcing causes the melt temperature to continue to rise, further arcing and further distance pulling apart, Until the circuit is completely cut off. For SMD fuses, their operating principle is the same. However, due to different structural states, the surrounding of the metal melt is tightly surrounded by the polymer or ceramic materials of its substrate. Even the melted metal cannot contract towards both ends and can only rely on diffusion, infiltration, or absorption towards the surrounding materials. If the overcurrent disappears during this process (such a

September 11,2023

How to Realize the Protection Function of PTC Self Recovery Fuses.mini blade fuse vs standard

　　　　How does PTC self recovery fuse achieve protection function? The actual process of PTC overcurrent circuit protection is not yet clear, and its superiority needs further exploration. So far, it is believed that PTC is a polymer based self recovery fuse that can limit current.　　The principle of PTC self recovery fuse is to limit potentially harmful overload currents within a safe range. Specifically, excessive current flowing through the device can lead to an increase in internal heat (I2R), resulting in a temperature rise in PTC and an increase in its resistance. Before overheating occurs, PTC resistance usually only accounts for a small portion of the total impedance of the circuit. The increase in resistance of polymer PTC self-healing fuses has a non-linear characteristic, and such relatively large resistance will reduce or limit the current in the circuit to a safe range. The transition point from low resistance to high resistance is called the "jump point".　　The heat generated

October 18,2023

supercheap auto blade fuse holder.How does a fuse work?

　　　　We all know that when current flows through a conductor, it will generate heat due to the presence of a certain resistance in the conductor. And the calorific value follows this formula: Q=0.24I2RT; Where Q is the heat generated, 0.24 is a constant, I is the current flowing through the conductor, R is the resistance of the conductor, and T is the time for the current to flow through the conductor; Based on this formula, we can easily see the simple working principle of a fuse.　　When the material and shape of the fuse are determined, its resistance R is relatively determined (without considering its resistance temperature coefficient). When an electric current flows through it, it generates heat, and as time increases, its heat also increases. The magnitude of current and resistance determines the rate of heat generation, while the construction and installation of a fuse determine the rate of heat dissipation. If the rate of heat generation is less than the rate of heat dissipation,

October 11,2023

air conditioner fuse location.Disposable slow blown fuse

　　　　The disposable slow blow fuse 0402 is a very compact patch fuse with a size of only 1 * 0.5mm, which is the smallest fuse in the patch fuse.　　The BFS0402 series of BDT-FUSE brand from Baodian Tong can be selected for the 0402 disposable slow blow fuse. This series is a surface mount fast melting thin film fuse. The ultra small package (0402 specification) is very suitable for secondary protection of circuits and is suitable for applications with limited space, such as handheld portable electronic devices. This series is lead-free and meets the requirements of the RoHS directive.　　The BFS0402 series can correspond to a working current range of 0.25A, 0.375A, 0.5A, 0.75A, 1A, 1.25A, 1.5A, 1.75A, 2A, 2.5A, 3A, 3.5A, 4A, 5A, and a working voltage of 32V. The interruption rating under 32VDC is 35A. BFS0402 provides significant protection for sensitive circuits, and the fuse can activate protection within 5 seconds under a 200% overload condition.

September 15,2023

The Development History of Micro Fuses.does fuse brand matter

　　　　From a long-term perspective, the development process of micro fuses is mainly a new variety derived to meet market demand. Fuses protect the circuit by fusing themselves with the Joule heat of the current flowing through the body of a fusible metal, thereby cutting off the circuit.　　In the second half of the 19th century, fuses emerged with the invention of various electrical equipment led by electric lights. Since then, the structural form of fuses has remained basically unchanged and has continued to this day. We often see things like glass tube fuses and chip fuses in cars. As a protective component of electronic devices, glass tube fuses have been used for a long time. However, due to their large size, easy breakage, and inability to achieve automated installation, the demand for miniature fuses in the industry is becoming increasingly high.　　The main purpose of traditional fuses is to protect the input part of the power supply. Nowadays, there have been some changes in the si