Precautions for installation of NEC Thermal cutoff.thermal protector for led lights_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

18 2023-07

Share:

　　

　　When bending the lead wire, it should be bent from the component at least 6 millimeters away from the root; When bending, it is not allowed to damage the roots and leads, and it is not allowed to forcefully pull, press, or twist the leads.

　　2. When the thermal fuse is fixed by screws, riveting, or wiring terminals, it should be able to prevent mechanical creep and the occurrence of poor contact.

　　3. The connecting components should be able to work reliably within the working range of the electrical product, without displacement due to vibration and impact.

　　When conducting wire welding operations, the heating humidity should be limited to the minimum, and attention should be paid not to apply high temperatures to the thermal fuse; Do not forcefully pull, press, or twist the thermal fuse and leads; After welding, it should be immediately cooled for more than 30 seconds.

　　5. The thermal fuse can only be used under the specified rated voltage, current, and specified temperature conditions, especially paying attention to the maximum continuous temperature that the thermal fuse can withstand. Note: The nominal current, lead length, and temperature can be designed according to customer requirements.

Read recommendations:

solar panel fuse size

The Function of Fuses in Home Circuit Leakage Protectors.battery fuse block

Selection of fuse type.motorcycle fuse box waterproof

PREVIOUS:Delay fuse.smd fuse code

Return

Next：Action temperature of NEC Thermal cutoff.thermal controller alienware

Related News

October 13,2023

outboard motor thermostat stuck open.0467 series patch fuse

　　　　The 0467 series patch fuse is a disposable fuse, and the fast melting surface mount fuse (SMF) is a ultra small (0603 size) thin film device designed for secondary protection of circuits used in space limited applications such as handheld portable electronic devices. This series is 100% lead-free and meets the requirements of the RoHS directive.　　The rated current range of the 0467 series patch fuse is 0.25A-5A, the rated voltage is 32V, the working environment temperature is -55 ℃ to 125 ℃, the cold resistance is 0.0089-0.5650, and the voltage drop is 61.20-158.56. The main material of this series: The fuse body is mainly an advanced high-temperature substrate, with 100% tin nickel on copper at both ends and a conformal coating on the outer layer. This series works normally in an environment of -55 ℃~90 ℃, with a specification size of 1.6mm * 0.8mm and packaging method of 8mm mm tape and reel, with 5000 pieces per roll.　　0467 Chip Fuse Parameter Table　　The 0467 series fuse models

September 08,2023

Which is better, disposable fuse or self restoring fuse.surface mount fuse letter code

　　　　From a structural perspective, a self restoring fuse is composed of a polymer polymer, essentially a positive temperature coefficient thermistor. It provides circuit protection through the positive correlation between the resistance value of PTC material and temperature, as well as the sudden change at the Curie temperature point. It can be reused without frequent replacement; Disposable fuses are made of ordinary fuse materials, so they cannot be used again after each action and require frequent replacement.　　From the perspective of working action, they can all be used for overcurrent protection of circuit currents and can be interchanged in many occasions. For example, in battery protection applications where overcurrent protection requirements are not too high, these two types of products can both lead the way and can even be replaced, and most of the time, each has its own field.　　In the protection application of certain important devices such as ICs, or in the input/output ter

August 12,2023

Precautions for using fuses.motorcycle fuse box

　　　　(1) Do not use too thin fuses. Using thin fuses can easily cause the normal current flowing through it to burn out, resulting in unnecessary power outages;　　(2) It is necessary to choose and use a suitable fuse, and the fuse's blowing current is usually 1.5-2.0 times the rated current. If the sum of the total power of each household appliance exceeds 1100 watts during normal electricity use in a household, choose a 5-ampere fuse and use a No. 20 fuse with a diameter of 0.98 millimeters. When the current exceeds 7.5 amperes to 10 amperes, the fuse will automatically blow to achieve protection;　　(3) When installing fuses on the power switch (switch), it is not allowed to operate with power on. The power switch should be opened and the power should be disconnected;　　(4) Turn the fuse clockwise around the fastening screw and tighten the screw with a gasket until it is firmly tightened. Do not use excessive force to tighten it too tightly and damage the fuse; In addition, the fuse shoul

October 14,2023

air conditioner fuse block pull-out.What is the breaking capacity of a fuse

　　　　As a safety component, in addition to its performance requirements, a fuse must also have strict safety requirements. The breaking capacity of a fuse is an important indicator reflecting the safety performance of the fuse. Its specific meaning is: the maximum short-circuit current that the fuse can withstand without any unsafe phenomena during the process of breaking the circuit. The unsafe phenomena here include - continuous arcing, smoking, spraying, splashing Burning, explosion, etc. Tubular fuses can be classified into high breaking (1500A), low breaking (35A or 10In), and enhanced breaking (150A) types based on their breaking capacity. The breaking capacity of chip fuses is generally between 30-60A, which is often overlooked or misunderstood by users or confused with the fusing characteristics of fuses, The correct understanding of the breaking capacity of a fuse should be that the extreme maximum current in the event of a short circuit in the protected circuit cannot exceed t

September 19,2023

2022.07.08 Warmly celebrate XuCheng ' 20th anniversary."

　　　　20 years ago, Xucheng Electronics (Shenzhen) Co., Ltd. was officially established On July 8, 2002,! Over these many years, Xucheng colleagues and customers have accompanied the company in its growth journey, witnessing its evolution from small to large, from strength to strength, weathering challenges together. Xucheng is currently undergoing transformation, innovation, and development, which remain the eternal themes of the company ! We believe that Xucheng's future will be even better!"