Innovation and Safety of Low Temperature Fuses_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

27 2024-07

Share:

　　 2f652d92c9c961b

　　Protecting the safety of circuits is crucial in modern electronic devices. We are proud to introduce the latest low-temperature fuse technology to provide excellent protection for your equipment. Low temperature fuses adopt advanced material science, which can respond to temperature changes in a very short time, ensuring that the circuit will not be damaged due to overheating.

　　Product features:

　　-Quick response: Low temperature fuses can cut off current in milliseconds to prevent circuit overheating.

　　-High reliability: Made of high-quality materials to ensure stable performance in extreme environments.

　　-Environmentally friendly design: lead-free, halogen-free, compliant with RoHS standards, green and environmentally friendly.

　　Applicable scenarios:

　　-Consumer electronics: smartphones, tablets, laptops, etc.

　　-Automotive electronics: electric vehicles, auto drive system, on-board entertainment system, etc.

　　-Industrial control: automation equipment, robots, smart factories, etc.

　　Choose our low-temperature fuses to ensure safe and stable operation of your equipment in any situation. Innovative technology, guarding every moment.

Read recommendations:

3 amp blade fuse

thermal imaging sensor

2a surface mount fuse

thermal protector for recessed ceiling fixtures

air conditioner fuse replacement

PREVIOUS:reset motor thermostat on shark vacuum.The resistance value of the fuse resistance

Return

Next：Classification of fuses

Related News

September 08,2023

Which is better, disposable fuse or self restoring fuse.surface mount fuse letter code

　　　　From a structural perspective, a self restoring fuse is composed of a polymer polymer, essentially a positive temperature coefficient thermistor. It provides circuit protection through the positive correlation between the resistance value of PTC material and temperature, as well as the sudden change at the Curie temperature point. It can be reused without frequent replacement; Disposable fuses are made of ordinary fuse materials, so they cannot be used again after each action and require frequent replacement.　　From the perspective of working action, they can all be used for overcurrent protection of circuit currents and can be interchanged in many occasions. For example, in battery protection applications where overcurrent protection requirements are not too high, these two types of products can both lead the way and can even be replaced, and most of the time, each has its own field.　　In the protection application of certain important devices such as ICs, or in the input/output ter

October 20,2023

slow blow fuse vs fast blow fuse.The difference and function of fuses and relays

　　　　A relay is actually an "automatic switch" that uses a smaller current to control a larger current. Therefore, it plays a role in automatic regulation, safety protection, and conversion circuits in the circuit.　　The function of a fuse is to: when a circuit malfunctions or is abnormal, the current continuously increases, and the increased current may damage some important or valuable components in the circuit, or burn the circuit or even cause a fire. If the fuse is correctly installed in the circuit, the fuse will fuse and cut off the current when the current abnormally rises to a certain height and time, thereby protecting the safe operation of the circuit.　　The relay can be 'off' or 'on' through current control, that is, it can be reconnected after being disconnected, while the Shenzhen fuse needs to be replaced after being disconnected, and programs cannot be used to reconnect it.

September 21,2023

The principle of fuses.air conditioner fuse box replacement

　　　　When a fuse is energized, its own resistance converts electrical energy into heat, causing the melt to heat up. At the same time, the heat generated by the current also radiates to the surrounding environment through the melt and shell, and dissipates heat through convection and conduction. When a fuse passes through the allowable working current, the heat emitted and generated reaches a balance, and the heat does not accumulate in the melt, causing the temperature of the melt to rise. Therefore, the fuse will not reach its melting point and blow. When the current passing through the fuse reaches a certain value, the heat converted from electrical energy increases, and the heat dissipation rate cannot keep up with the heating rate. This heat gradually accumulates on the melt, causing the temperature of the melt to rise. When the temperature reaches the melting point of the fuse, the fuse begins to melt and continues to absorb heat, further melting into a liquid state. Subsequently,

July 21,2023

Calculation method for high-voltage fuses.tv fuse replacement

　　　　For high current protection zones, the selected fuse should have the following performance: ① large capacity, usually in the tens to hundreds of A; ② Capable of withstanding instantaneous high currents and pulses; ③ High safety and reliability; ④ The operating environment temperature is relatively high; ⑤ Good mechanical characteristics.　　1. Selection of fuse type　　Select the appropriate type based on the working environment, size limitations, current characteristics, voltage characteristics, connection method, etc. of the fuse. Usually, high-voltage fuses for electric vehicles use American standard FWH, FWP, and other series.　　2. Determination of fuse parameters　　The rated current value of fuses is usually based on the value at an ambient temperature of 23 ± 5 ℃. In order to meet the actual operating requirements of electric vehicles, it is necessary to modify the rated current value.　　By using the above formula, a preliminary rated current of the fuse can be obtained. However, in

October 12,2023

glass tube fuse vs blade fuse.How to Protect Circuits with Self Recovery Fuses

　　　　When the circuit is working normally, it has no impact on the protected circuit, and its resistance value is very small, with little power consumption on the circuit. When the circuit is abnormal, the current is too high, or there is a short circuit in the circuit, the fuse can quickly block the excessive current, protecting the safety of the circuit and other components.　　When there is an abnormality in the circuit, the self recovery fuse activates protection. When the protection is activated, the current in the circuit is not completely interrupted, but momentarily drops to a very small current. At this point, the equipment on the circuit will stop working. After manually powering off and troubleshooting, when the power is restored, the self restoring fuse will automatically return to the state before protection. Without replacing the fuse, the circuit can resume normal operation. If the fault is not resolved or if the fault reoccurs, the self recovery fuse will still activate pr