Characteristics of Micro Fuses.tube amp fuse blown_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

Online Message

19 2023-08

Share:

　　 65c6c49caf393eb

　　Micro fuse is a type of fuse with relatively small volume. With the continuous development of domestic technology, many high-end and small products also need it. Currently, there are two common types of fuses in the market: micro circular fuse and micro square fuse. So what are its characteristics? The editor will now answer for everyone.

　　1. Characteristics of miniature fuses:

　　Micro fuse is an electronic component suitable for insertion or welding into corresponding electrical appliances. It has small size, high sensitivity, and fast response, which can better reflect its advantages in circuits where the product space is not very large.

　　2. Application scope:

　　Micro square fuses can be applied in set-top boxes, switching power supplies, power adapters, LCD TVs, computers, communication products, telephones, household appliances, various instruments, and various electronic components.

　　392 series miniature square fuse

　　The series of plastic encapsulated fuse circular slow break explosion-proof miniature fuses are widely used in power supplies, computer power supplies, adapters, switch power supplies, chargers, LED power supplies, communication products, telephones, household appliances, various instruments, and small household appliances.

Read recommendations:

mini blade fuse holder

car battery fuse

temperature control mattress protector.Here are some practical tips to know about fuses

youtube fuseschool.Does the fuse have a resistance value?

PREVIOUS:How many amperes of fuses should be selected for the 315 transformer?trolling motor fuse

Next：The Function of Fuses in Home Circuit Leakage Protectors.battery fuse block

Related News

November 06,2023

air conditioner fuse block pull-out replacement.Application scenarios for self restoring fuses

　　　　Application of Self Recovery Fuse in RS485 Communication Port Lightning Protection　　RS485, as one of the most commonly used serial differential communication methods in the industry, adopts a balanced transmission and differential reception method, which has the ability to suppress common mode interference. Due to its long communication distance (over 1200m), high transmission rate (10Mbps), high signal-to-noise ratio, convenient control, low cost, and the ability to achieve multiple nodes on a single bus, as well as the variety of transceivers that can be used, RS485 has the advantages of being able to suppress common mode interference, It has been increasingly recognized by users.　　However, with the increase in usage frequency, the problems encountered are also increasing day by day. Due to the fact that RS485 communication transmission lines are usually exposed outdoors, lightning and electrostatic interference have become common problems in practical engineering of RS485 commun

October 26,2023

resettable surface mount fuse.Some precautions in the use of fuse tubes

　　　　1. The rated voltage of the selected fuse should be greater than the input voltage of the protected circuit.　　2. The rated current of UL specification fuses is determined under laboratory conditions and should be less than 75% of the nominal value during actual use.　　3. The rated current of IEC standard fuse tubes can be used at 90% or 100% of the nominal value in actual use.　　4. The working life of fuses varies under different operating temperatures. The higher the temperature, the shorter the working life of the fuse; When selecting fuses in practice, it is necessary to refer to the working environment temperature for selection　　5. The breaking capacity of a fuse tube is directly proportional to its volume and inversely proportional to the rated voltage.　　6. Under more than 100000 pulse impacts, the pulse I2T of the protection circuit should be less than 20% of the rated I2T of the fuse tube.

August 03,2023

Waterproof fuse holder and its electroplating treatment.resettable fuse symbol

The design and development of waterproof fuse holders are aimed at better installation and replacement of individual fuses. When installing fuses, we need to use some necessary equipment. Only after the equipment is completed can we ensure a smoother installation of the fuse. When installing equipment, we should use waterproof fuse holders because without this equipment, we cannot install fuses on the products we need.When studying fuses, we usually take a look at the waterproof fuse holder. Due to different integrations being installed on different circuit boards, if the circuit boards are different, then the waterproof fuse holder we choose should be different. The installation position is different, and the waterproof fuse holder we choose should be different.The fuse holder can be divided into panel mounted fuse holders, PCB (hard) board fuse holders, automatic plug-in fuse holders, and plug-in fuse holders. The fuse holder must include requirements for resistance to current, volta

September 22,2023

Fuses

　　　　Fuses (patch type fuses), also known as fuses, as the name suggests, are used to protect circuit components. When the current exceeds the specified range of the electrical appliance, the fuse will heat up and blow, thereby achieving the purpose of cutting off the current and protecting the electrical appliance. Supplementary knowledge on purchasing chip type fuses: 1. The working current of the selected chip type fuse should not exceed 75% of the rated current of the fuse. 2. The impact resistance of patch fuses is much smaller, so when purchasing patch fuses, special attention should be paid to pulse, impulse current, surge current, starting current, and circuit transient values. 3. Confirm the size of the circuit overload current that the patch fuse needs to pass through and the minimum and maximum duration of the overload current. 4. Another characteristic of patch type fuses is that by installing fuses with excessive internal resistance in certain circuits, they can affect the

November 10,2023

temperature control mattress protector.Here are some practical tips to know about fuses

　　　　What is a fuse? This is an excellent small device that can self destruct in the event of surges or other overcurrent conditions. Why do people create such a device? The reason is very simple, that is to protect other parts of the circuit where the fuse is located. Compared to replacing the entire circuit that may be destroyed, the cost of replacing a fuse is negligible.　　Due to the fact that fuses are a very common and replaceable component, we believe it is necessary to provide a more in-depth introduction to the purpose, testing, and diagnostic methods of fuses, as well as to showcase various types of fuses and their different shapes and sizes　　Common Sense 1: How to determine if a fuse is blown?　　If a fuse can be removed from the circuit, the simple method to determine whether it has blown is to conduct a continuity test. Take a multimeter and select continuity or resistance settings. Next, perform a quick test on the multimeter to determine if it is working properly by touching