temperature switch thermostat thermal protector fuse.Micro fuse_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

06 2023-11

Share:

　　

　　A professional enterprise engaged in the research and development, production, and sales of patch fuses and plug-in fuses. All products meet the requirements of lead-free and halogen-free environmental protection, and have obtained foreign authoritative safety certification such as UL, VDE, TUV, etc. The products are widely used in industries such as computers, communication, security, automobiles, toys, and household appliances.

　　Main supply products: self recovery fuses, disposable fuses, patch fuses, plug-in fuses, Litteluse Litteluse fuses.

　　The miniature fuse meets the following conditions:

　　1. Power on capacity: Power on at rated current for 1 hour without fusing.

　　2. Temperature rise: When energized according to the rated current, the ground temperature rise is less than 75 ℃.

　　3. Fusing test: Fusing within 1 minute at twice the rated current.

　　4. Breaking capacity: When the rated breaking capacity is added, there will be no continuous arcing or ignition.

　　This product can be applied in battery chargers, consumer electronics, power supply, industrial controllers, chargers, and some special small circuit space devices.

Read recommendations:

2 amp mini blade fuse

air conditioner fuse blown

JK-SMD 1206 Series

Plug type fuse.motor blows fuse on startup

mini blade fuse tap design.What are the application areas of glass tube fuses

PREVIOUS:battery charger fuse size.How to Select Low Voltage Fuses with Chip Mounts

Return

Next：air conditioner fuse block pull-out replacement.Application scenarios for self restoring fuses

Related News

September 22,2023

Surface Mount Fuses.motorcycle fuse block with relay

　　　　1. The location where the patch fuse is connected to the circuit　　When connecting patch fuses in a circuit, it is important to be careful not to connect the fuse to the neutral or ground wire. The correct connection is to connect it to the live wire, so that when the circuit is overloaded, the fuse can be blown in a timely manner to protect circuit safety. If only connected to the neutral line or ground wire, the fuse should blow in a timely manner, but the voltage carried by the positive and negative poles through the live wire may also cause the circuit to burn out. Therefore, the priority order for fuses to be connected to the circuit is the live wire, neutral wire, and ground wire.　　The location where the fuse is connected to the circuit　　2. Connection method of patch fuse in circuit　　Usually, fuses are connected in series in a circuit. If the fuses are connected in parallel in the circuit, the current cannot be disconnected in a timely manner in case of abnormal conditions in

November 02,2023

sony bravia tv fuse location.Discussion on the Testing Method of Chip Fuses

　　　　We know that there are many series of fuses in the electronic component market, including patch fuses. This series of fuses is commonly used in factories, with few being used by individual users. But what should we pay attention to when testing patch fuses? Today, editor Dai Liang, let's take a look together. Firstly,　　The detection method for patch fuses is recommended to be based on the following aspects: normal current, fusing current, open circuit voltage, short circuit current, impulse current, and ambient temperature.　　1. Normal current: Firstly, we must know the normal current flowing through the fuse in the circuit used. Usually, we need to pre-set a derating amount and choose according to the following principle: the normal current must be less than the product of the rated current and the derating coefficient.　　2. Fusing current: According to UL specifications, the fuse should quickly fuse at twice the rated current. But in most cases, to ensure reliable fusing, we recomm

November 09,2023

temperature balancing mattress protector.The difference between fast break patch fuse and slow break patch fuse

　　　　The main difference between slow fuse and fast fuse is its ability to withstand instantaneous pulse current, which means that it can resist the impact of surge current when switching on and off, thereby ensuring the normal operation of the equipment. Therefore, slow fuse is often referred to as surge resistant fuse. From a technical perspective, slow melting fuses have a large melting heat value of I2t, and the energy required for fuse melting is relatively high. Therefore, for fuses with the same rated current, slow melting has a much stronger ability to withstand pulses than fast melting.　　Due to the fact that the I2t of a slow fuse is larger than that of a fast fuse of the same specification, the fusing time in the event of overcurrent in the circuit will also be slower than that of a fast fuse. Is it possible that the protection performance may be worse than some people are concerned about? We said no! Because once a circuit malfunctions, the overcurrent will not disappear on i

August 25,2023

Self recovery fuse for overcurrent protection on industrial control motherboard.air conditioner fuses near me

　　　　1. Where is the self recovery fuse used?　　Self recovery fuses are used for overcurrent protection between motherboard power supplies, LCD displays for power overcurrent protection, and PGA core circuit overcurrent protection. They are mainly used in various levels of power supply and signal line short-circuit overcurrent circuits.　　2. What problems can self restoring fuses solve?　　The self recovery fuse mainly solves the following problems on the industrial control motherboard: 1. Internal short circuit overload protection problem; 2. External short circuit overcurrent protection issue.　　The industrial control motherboard is prone to heat generation due to prolonged continuous operation. In addition, there are power circuits and other circuits that experience excessive current due to faults, burning out critical circuits and chip equipment in the motherboard. Regardless of overload, short circuit, or incorrect power connection, it will cause a sharp increase in current in the circu

July 19,2023

Glass sealed fuse temperature rise.smd fuse types

　　　　Temperature rise refers to the difference between the temperature at which a fuse stabilizes under the specified current value (100% In in UL and 115% In in Japanese regulations) and the temperature before power on.　　Classification of current fuses:　　According to size, it can be divided into: size, 3.6X10, 3X10, 5X20, 6X30, 6X32, 6X25, 10 * 38, 2.4X7, 2.5X6, 3X8, 2.5X9, 8.5X8, 8.5X8X4, 3.5X10, 3.5X9　　According to current, it can be divided into 32ma, 63ma, 100mA, 150mA, 200mA, 250mA, 300mA, 400mA, 500mA, 600mA, 800mA, 1A, 1.25A, 1.6A, 2A, 2.5A, 3A, 3.5A, 4A,　　5A, 6A, 7A, 8A, 9A, 10A, 12A, 15A, 20A, 25A, 30A　　According to material classification, it can be divided into:　　Glass current fuse, ceramic current fuse　　Product Introduction:　　Limits for Pre arcing Time　　% of Ampere Rating Opening Time　　100% 4 hours, minimum　　200% 120 seconds, max　　The overall size of the product is 3x10mm, with 3mm being the diameter of the glass tube and 10mm being the length of the glass tube. The two end