Waterproof fuse holder and its electroplating treatment.resettable fuse symbol

The design and development of waterproof fuse holders are aimed at better installation and replacement of individual fuses. When installing fuses, we need to use some necessary equipment. Only after the equipment is completed can we ensure a smoother installation of the fuse. When installing equipment, we should use waterproof fuse holders because without this equipment, we cannot install fuses on the products we need.

When studying fuses, we usually take a look at the waterproof fuse holder. Due to different integrations being installed on different circuit boards, if the circuit boards are different, then the waterproof fuse holder we choose should be different. The installation position is different, and the waterproof fuse holder we choose should be different.

The fuse holder can be divided into panel mounted fuse holders, PCB (hard) board fuse holders, automatic plug-in fuse holders, and plug-in fuse holders. The fuse holder must include requirements for resistance to current, voltage, high temperature, and fire rating. These factors mainly depend on the quality of the plastic and metal components of the fuse holder, and the better the quality, the higher the temperature resistance.

The assembly of the waterproof fuse holder consists of nuts, plastic, copper, etc. When electroplating waterproof fuse holder terminals, there are certain requirements for the surface of the electroplating production area: anti-corrosion, anti-seepage, and anti liquid accumulation. There is a water tank on the production line to collect spray liquid and cleaning liquid. The primary requirement for a high-quality electroplating production line is the automatic continuous electroplating production line equipment, which requires good electroplating production process habits.

The electroplating quality of the waterproof fuse holder terminal is good or not directly related to the subsequent PCB welding work. The electroplating quality directly affects the welding quality. We often encounter problems such as poor production process and electroplating oxidation, and the metal electroplating surface is very unstable. This is why we have always emphasized the importance of the waterproof fuse holder terminal electroplating process.

Read recommendations:

temperature sensor wifi

glass tube fuse

power fuse inverter

Application of Overcurrent Protection for Self Recovery Fuses.air conditioner fuse replacement

surface mount fuse identification.Disposable fuse