Glass sealed fuse temperature rise.smd fuse types_Industry Trends_News & Events_XC Electronics(Shenzhen)Corp.,LTD

中文

Online Message

19 2023-07

Share:

　　

　　Temperature rise refers to the difference between the temperature at which a fuse stabilizes under the specified current value (100% In in UL and 115% In in Japanese regulations) and the temperature before power on.

　　Classification of current fuses:

　　According to size, it can be divided into: size, 3.6X10, 3X10, 5X20, 6X30, 6X32, 6X25, 10 * 38, 2.4X7, 2.5X6, 3X8, 2.5X9, 8.5X8, 8.5X8X4, 3.5X10, 3.5X9

　　According to current, it can be divided into 32ma, 63ma, 100mA, 150mA, 200mA, 250mA, 300mA, 400mA, 500mA, 600mA, 800mA, 1A, 1.25A, 1.6A, 2A, 2.5A, 3A, 3.5A, 4A,

　　5A, 6A, 7A, 8A, 9A, 10A, 12A, 15A, 20A, 25A, 30A

　　According to material classification, it can be divided into:

　　Glass current fuse, ceramic current fuse

　　Product Introduction:

　　Limits for Pre arcing Time

　　% of Ampere Rating Opening Time

　　100% 4 hours, minimum

　　200% 120 seconds, max

　　The overall size of the product is 3x10mm, with 3mm being the diameter of the glass tube and 10mm being the length of the glass tube. The two ends are mechanically welded with leads, and the conventional leads are 25mm each. The total length of the tube body is 60mm, and the total length of the leads can be extended according to user needs.

Read recommendations:

automotive blade fuse sizes

Detailed Explanation of the Development History and Trends of Surface Mount Fuses.fast blow or slow blow fuse for microwave

The fuse industry is poised for growth.automotive blade fuse manufacturers

PREVIOUS:Thermal cutoff NEC.best hair thermal protector

Return

Next：Breaking capacity of glass sealed fuse.ptc reset fuse

Related News

September 13,2023

Self recovery fuse for overheat protection in circuits

　　　　Self restoring fuses can respond to temperature increases caused by external heat and internal current, and establish thermal connections with high-voltage equipment to provide overheating protection. Establishing this thermal connection can be achieved by arranging these devices in contact with or near high-voltage equipment.　　The contact method enables the self recovery fuse to easily form physical contact with the device, thereby improving the protection effect. Transformers are a good example of this type of equipment. Self restoring fuses can be tied to external coils or enclosures to establish thermal connections. A self restoring fuse can be integrated into the circuit during design, enabling it to send a warning to the controller in the event of transformer overheating, and the system will immediately stop running.　　The close proximity method is suitable for the protection of power semiconductor components, and the best effect is achieved when a small surface mounted self r

September 19,2023

The Importance of Fuses in Safe Sockets.battery terminal fuse replacement

　　　　A safety socket generally refers to a socket with a fuse and a power on indicator light. Usually, it has the characteristics of preventing leakage, overcurrent, high temperature, and lightning strikes, so safe sockets are also very popular in daily life. Today, I will tell you the importance of fuses in safe sockets　　In recent years, with the rapid development of science and technology and the widespread application of safety sockets, safety issues have also risen to a new level. In safety sockets, it is worth noting that when a fuse is blown, do not connect a wire to save time, as this will not function as a safety measure. It's best to go to a hardware store to purchase fuses or have a professional electrician repair them~!　　At the same time, the socket hole of the safety socket is covered by a layer of baffle, and you must use a pin to pass through the socket, which cannot be touched by hand.

October 18,2023

surface mount fuse identification.Disposable fuse

　　　　There are two optional types of self recovery fuses and disposable fuses available for surface mounting. Both self recovery fuses and disposable fuses can respond to excessive current, but the "self recovery" device of self recovery fuses, based on polymer components, can automatically reset after overload disappears, achieving multiple overcurrent circuit protection. When a conductive polymer is heated by an overload current, its resistance will increase, thereby limiting the circuit current. The advantages are more prominent in many products. However, it is not possible to replace disposable fuses with self restoring fuses. Both have their own advantages and disadvantages. In terms of overload protection for circuits, the two do not have the best products. Only by fully understanding the performance differences between the two types of fuses can we make easier choices when choosing the optimal circuit protection scheme. Then, based on the specific working conditions of the circui

October 25,2023

motorcycle fuse keeps blowing.How to select the type of self recovery fuse for procurement?

　　　　Which is the best choice for Shenzhen's self recovery fuses with a wide variety of models and a complete range? The selection of self restoring fuses has always been a classic topic in the electronics industry. On the way to PTC selection, there is always a model that belongs to you, accompanied by the "Six Steps" of ensuring power supply:　　1) Determine parameters: standard working current, maximum working voltage, maximum fault current, and maximum working environment temperature;　　2) Determine the PTC that can adapt to the maximum working environment temperature and standard working current using a temperature reduction table;　　3) Use the electrical characteristic table to verify the maximum electrical rating of the self recovery fuse selected in step 2 and compare it with the maximum working voltage and fault current of the circuit;　　4) Determining the action time: In order to provide better protection effect for the circuit, it is crucial to clarify the working time of PTC;　　5)

November 17,2023

motorcycle blown fuse symptoms.Selection Techniques and Installation Process of Chip Fuses

　　　　The fusing current of patch fuses is 1.5 to 2.0 times the rated current. When electrical equipment is in normal use, its fuse will not blow. When the current in the circuit exceeds 5 times its rated current, it will automatically fuse to provide protection. If the fuse of the electrical equipment blows during normal use, it indicates that the current in the circuit exceeds the rated value. Therefore, the cause should be promptly investigated.　　During the installation process of patch fuses, it is necessary to first pull off the switch on the distribution board, cut off the power supply, and preferably use an electric pen to test whether there is power before operating. For fixing screws and washers, copper should be used instead of temporary iron, as iron can easily rust over time and lead to poor contact. When tightening the fuse, do not use too much force to prevent the fuse from being flattened and causing a decrease in cross-sectional area, rated current, and fusing current, wh