Online Message
Online Message
News & Events News & Events

News & Events

Keep abreast of company dynamics

air conditioner fuses near me.There are too many types of fuses

12

2023-10

Share:

  b32eac7b1371224

  Miniature fuses are primarily used in digital cameras, laptops, mobile phones, and other electronic products. From traditional glass tube fuses to miniature fuses, the selection focus varies slightly due to differences in product technology. The selection of miniature fuses involves the following elements:

  The normal operating current of the circuit should not exceed 75% of the rated current of the fuse.

  2. Pulse, pulse current, surge current, starting current, and circuit transient values. Micro fuses are particularly concerned about this. Due to technological reasons brought about by small-scale, the impact resistance of miniature fuses is much lower than that of glass tube fuses or other larger fuses with the same rated current.

  3. The size of the overload current and the minimum and maximum duration of the overload current in the circuit generally require oscilloscope testing and theoretical calculations to determine the size of the overload current. The basic requirement for fuses is that they should not be interrupted at any time and should be interrupted at an appropriate time.

  4. The resistance of micro fuses has a certain impact on certain circuits: if a fuse with excessive internal resistance is installed in certain circuits, it will affect the system parameters of the circuit, making it unable to operate normally;

  If SMD fuses have high requirements, they usually use thin film processes with very low internal resistance values, making them suitable for overcurrent protection such as surges. Computer peripherals, communication devices such as mobile phones, digital cameras, monitors, and batteries are commonly used.

  Chip fuses are classified and managed according to their performance, and can be divided into several categories: fast fuses, slow fuses, and enhanced melting heat energy.

  Patch fuses can be divided into disposable patch fuses and patch self recovery fuses. Disposable patch fuses must be replaced after protection, and self recovery fuses can automatically repair and recycle after power failure. However, what issues should everyone pay attention to when purchasing SMD fuses?

Read recommendations:

bimetallic thermostat works on the principle of

ceramic fuse holder

radial circuit fuse size

primos 250 solar thermal controller.The difference between a fuse resistor and a fuse

What is the principle and material of a fuse.mini blade fuse box

PREVIOUS:automotive blade fuse colours.fuse PPTC for overcurrent protection in photovoltaic street light controllers)

Return

Next:battery terminal fuse nissan problems.Self recovery fuse application

Related News